Online-Support-btn

Home :: Ford V8 :: Ford V8 221-302, 5.0L (except HO) 1962-1995
Ford V8 221-302, 5.0L (except HO) 1962-1995

7-Ford-Small-Block--1963-1995-(except-302-H.O.)-HFTC-HRC 220001
cam recommendation_btnAll Howards™ Cams use the highest-grade race quality cores available. All hydraulic and mechanical flat tappet camshafts are 100% Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. Howards™ Cams are manufactured on dedicated high precision cam grinding machines. Most Howards™ Cams are packaged and shipped in our unique, hard, high impact plastic reusable cases. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.







Cam Part No. Cam & Lifter Set Part No. Duration
IN
Advertised
EX
Duration
IN
@.050"
EX
Valve w/1.60 
IN
Lift Rockers
EX
Lobe Separation Angle Intake Centerline Valve
IN
Lash
EX
Notes
212001-14 NA 255 261 201 207 .437 .448 114 110 Hyd. Hyd.
600-4800  Smooth idle, stong low end. High vacuum, good fuel economy.     
210021-12 CL210021-12 259 267 205 213 .448 .480 112 108 Hyd. Hyd. 1
1000-4500  Great low & mid-range. Smooth idle. Good in PUs & RVs.     
212161-11 NA 263 263 209 209 .448 .448 111 107 Hyd. Hyd.
800-4400  Smooth idle, strong low end. High vacuum, good fuel economy.     
211031-11 CL211031-11 267 267 213 213 .459 .459 111 107 Hyd. Hyd. 1
1200-4700  Good idle, Street, Off-Road, Towing. Good fuel efficiency.     
210931-10 CL210931-10 269 269 215 215 .475 .475 110 106 Hyd. Hyd. 1
1500-5200  Strong low & mid-range, fuel efficiency & driveability.      
210031-12 CL210031-12 269 277 215 223 .475 .496 112 108 Hyd. Hyd. 1
1500-5400  Broad power band. Excellent in Hot Street & Marine.      
210991-08 CL210991-08 267 267 220 220 .543 .543 108 104 Hyd. Hyd. 1,16
1700-5700  Good low & mid-range horsepower. Needs 4 barrel & headers.     
212021-08 NA 267 277 220 230 .543 .563 108 104 Hyd. Hyd. 1,16
1600-5800  High lift, dual pattern. Need 4 barrel, low gears & 2500+ stall.     
210951-10 CL210951-10 275 285 221 231 .501 .501 110 106 Hyd. Hyd. 1
2000-6000  Street & Strip. Needs 4 barrel, headers & low gears.      
212431-06 NA 272 272 224 224 .551 .551 106 102 Hyd. Hyd. 1,16
2500-6400  Lopey idle, good low end & mid-range horsepower & torque.     
212431-08 CL212431-08 272 272 224 224 .551 .551 108 104 Hyd. Hyd. 1,16
2400-6600  Hot Street cam. 4 barrel & headers recommended.      
212431-12 NA 272 272 224 224 .551 .551 112 108 Hyd. Hyd. 1,16
2400-6600  Good idle, good mid range torque & horsepower. Needs 2400+ stall.     
210941-10 NA 279 279 225 225 .496 .496 110 106 Hyd. Hyd. 1
2400-5700  Needs good intake, 4bbl. & headers. Best with 9.5+ CR.     
210041-08 NA 279 285 225 231 .496 .512 108 104 Hyd. Hyd. 1
2000-6400  Hot Street performance in 385-418. 9.5:1, 2400 stall suggested.    
210041-12 CL210041-12 279 285 225 231 .496 .512 112 107 Hyd. Hyd. 1
2500-6200  Strong mid-range. Great E.T. Bracket cam. OK w/NOS.     
212141-08 CL212141-10 277 282 230 234 .563 .572 108 104 Hyd. Hyd. 1,16
2600-6500  Lopey idle, broad power band, strong top end power.      
212141-10 NA 277 282 230 234 .563 .572 110 106 Hyd. Hyd. 1,16
2600-6600  Lopey idle, Strong mid range. Good throttle response. 2400+ stall.     
212591-08 CL212591-12 277 287 230 240 .563 .592 108 104 Hyd. Hyd. 1,16
2800-6200  Lopey idle, Hot Street/Brackets. 2500+ stall, 9.0:1+ CR.     
212591-12 NA 277 287 230 240 .563 .592 112 108 Hyd. Hyd. 1,16
2800-6400  Hot Street & mild Bracket Racing.       
210961-08 CL210961-08 285 285 231 231 .501 .501 108 104 Hyd. Hyd. 1
2600-6300  Broad power range, extra performance in smaller engine.     
210051-08 NA 285 285 231 231 .512 .512 108 104 Hyd. Hyd. 1
3000-6500  Fair idle, Broad power band. Works well in heavy vehicles.     
210051-10 NA 285 285 231 231 .512 .512 110 106 Hyd. Hyd. 1
3000-6600  Strong power range from 3,500 up. Needs 4bbl., header & stall.     
211701-08 CL211701-08 282 291 234 244 .572 .596 108 104 Hyd. Hyd. 1,16
3000-6800  Rough idle, Hot Street/Strip, Big mid range torque and acceleration.     
211701-12 NA 282 291 234 244 .572 .596 112 108 Hyd. Hyd. 1,16
3000-6000 Lopey idle, Street/Strip or nostalgia. Likes headers & gears.     
212601-06 NA 282 287 234 240 .572 .592 106 102 Hyd. Hyd. 1,16
3000-6400  Bracket or 1/4 to 3/8 mile 4bbl. Oval Track. Proven winner.     
212601-08 NA 282 287 234 240 .572 .592 108 104 Hyd. Hyd. 1,16
3000-6400  Lopey idle, good mid-range power. Needs 3200+ stall.      
210971-08 NA 283 283 236 236 .583 .583 108 104 Hyd. Hyd. 1,16
3000-6600  Lopey idle, Pro-Street & Bracket Racing profile.      
210891-08 NA 287 293 240 246 .592 .600 108 104 Hyd. Hyd. 1,16
3000-6600  Rough idle, Hot Street/Bracket, great mid range & top end power. 3500+ stall.    
210891-10 CL210891-10 287 293 240 246 .592 .600 110 106 Hyd. Hyd. 1,16
3000-6600  Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.    
210891-12 NA 287 293 240 246 .592 .600 112 108 Hyd. Hyd. 1,16
2800-6400  Fair idle, Hot Street/Bracket, broad mid range performance. 3000+ stall.    
210061-08 NA 291 301 244 254 .596 .625 108 104 Hyd. Hyd. 1,16
3000-6600  Pro Street/Brackets, Strong mid & upper end power. 10.0:1+ CR.     
210061-12 NA 291 301 244 254 .596 .625 112 107 Hyd. Hyd. 1,16
3000-6600  Performance/Competition. Works well with small blower or NOS.     
212041-08 NA 293 293 246 246 .600 .600 108 104 Hyd. Hyd. 1,16
3200-6800  Hot Street/Brackets. Needs 10.0:1+ CR, good heads & exhaust. 3500+ stall.    
212401-10 NA 295 295 248 248 .605 .605 110 106 Hyd. Hyd. 1,16
3200-6800  E.T. Brackets. Strong mid & upper end power range.      
211541-08 NA 295 301 248 254 .605 .625 108 104 Hyd. Hyd. 1,16
3400-7000  Rough idle, Pro Street/Strip. Strong upper end power. Needs good heads, 3500+ stall.   
211541-10 NA 295 301 248 254 .605 .625 110 106 Hyd. Hyd. 1,16
3400-7000  Rough idle, Pro Street/Bracket. Broad upper end power. Needs good heads, 3500+.   
219991 NA Custom Grind Camshaft
Hydraulic Flat Tappet Special Order Camshaft.       
Hyd. Hyd. 1


OE Muscle Hydraulic Flat Tappet Camshafts          
217751-08 NA 252 252 187 187 .381 .381 108 103 Hyd. Hyd.
800-4200  Near duplicate of the Ford 210HP/289 cam (FMC #C3OZ-6250-B).     
217311-09 NA 270 298 184 189 .368 .381 109 114 Hyd. Hyd.
800-4300  Near duplicate of the Ford 230HP/302 cam (FMC #C3AZ-6250-V).     
217081-13 NA 288 288 218 218 .460 .460 113 107 Hyd. Hyd. 1
1600-5200  Near duplicate of the Ford Cobra Kit cam (FMC #C9OZ-6250-C).      


Max Certified Hydraulic Flat Tappet Cam & Lifter Sets          
MC210021-12 NA 259 267 205 213 .448 .480 112 108 Hyd. Hyd. 1
1000-4500  Great low & mid-range. Smooth idle. Good in PUs & RVs.     
MC210031-12 NA 267 277 213 223 .475 .496 112 108 Hyd. Hyd. 1
1500-5400  Broad power band. Excellent in Hot Street & Marine.      
MC210931-10 NA 269 269 215 215 .475 .475 110 106 Hyd. Hyd. 1
1500-5200  Strong low & mid-range, fuel efficiency & driveability.      
MC210951-10 NA 275 285 221 231 .501 .501 110 106 Hyd. Hyd. 1
2000-6000  Street & Strip. Needs 4 barrel, headers & low gears.      
MC210041-12 NA 279 285 225 231 .496 .512 112 107 Hyd. Hyd. 1
2500-6200  Strong mid-range. Great E.T. Bracket cam. OK w/NOS.     
MC210961-08 NA 285 285 231 231 .501 .501 108 104 Hyd. Hyd. 1
2600-6300   Broad power range, extra performance in smaller engine.     

Camshaft Notes

1. Stock (O.E.) valve springs cannot be used.
2. Requires thrust button.
3. Cam and lifter sets with "DL" suffix feature Direct Lube™ lifters.
4. Ignition firing order must be changed to 1-8-7-3-6-5-4-2.
5. Requires upgraded distributor gear.
6. Requires 3-Bolt timing set.
7. Requires use of Retro-Fit Tie Bar Hydraulic Roller Lifters.
8. Includes 2 camshafts.
9. Includes 4 camshafts.
10. Ignition firing order must be changed to 1-3-7-2-6-5-4-8.
11. Ignition firing order must be changed to 1-8-7-2-6-5-4-3.
12. Requires custom programmer/tuning.
13. Requires adjustable valvetrain.
14. No specific vacuum rating is guaranteed.
15. Lobes designed to take maximum advantage of .904" dia. lifter.
16. Lobes designed to take maximum advantage of .875" dia. lifter. 

 


8-Ford-Small-Block--1963-1995-(except-302-H.O.)-Retro-Fit-HRC-HRC 22xxx3
cam recommendation_btnPremium materials and advanced engineering to deliver unbelievable power. These cams offer significant advantages of additional lift and more power compared to flat tappet designs. The latest in lobe design produces better throttle response and top end horsepower. Designed with fast ramp speeds to give you the most power possible while maintaining the easy maintenance of a hydraulic cam.




Cam Part No. Cam & Lifter Set Part No. Duration
IN
Advertised
EX
Duration
IN
@.050"
EX
Valve w/1.60
IN
Lift Rockers
EX
Lobe Separation Angle Intake Centerline Valve
IN
Lash
EX
Notes
220225-12 CL220225-12 260 266 207 213 .480 .496 112 108 Hyd. Hyd. 1,7,10
800-4200  Great daily usage, smooth idle, great fuel economy.      
220315-10 NA 262 268 209 215 .496 .501 110 106 Hyd. Hyd. 1,7,10
1000-4400  Improved throttle response & low end torque.      
220235-10 NA 266 272 213 219 .517 .517 110 106 Hyd. Hyd. 1,7,10
1200-4600  Fair idle, good low & mid-range performance increase.      
220235-12 NA 266 272 213 219 .517 .517 112 108 Hyd. Hyd. 1,7,10
1200-4600  Good idle, Off-Road & Street Performance. 9.0:1 CR advised.     
222765-13 NA 270 270 217 217 .496 .496 113 109 Hyd. Hyd. 1,7,10
1600-5600  Good idle, strong low end & mid-range performance. Needs 2800+ stall.    
221275-10 CL221275-10 270 278 217 225 .528 .533 110 106 Hyd. Hyd. 1,7,10
1400-5600  Mild rough idle. Good torque & power. 1800+ stall.      
221275-12 CL221275-12 270 278 217 225 .528 .533 112 108 Hyd. Hyd. 1,7,10
1400-5600  Mild rough idle. Good torque & power. 1800+ stall.      
222725-10 CL222725-10 272 272 219 219 .544 .544 110 106 Hyd. Hyd. 1,7,10
1800-5800  Fair idle, strong Street Performance. Requires 9.0+ CR, 5-speed or 2800+ stall.    
221145-10 NA 272 278 219 225 .544 .533 110 106 Hyd. Hyd. 1,7,10
2000-6000  Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.   
221145-12 CL221145-12 272 278 219 225 .544 .533 112 108 Hyd. Hyd. 1,7,10
2000-6000  Good idle, good mid range power. Good vacuum. 9.5-10.5:1 CR, 2500+ stall.    
222745-12 CL222745-12 278 278 225 225 .533 .533 112 108 Hyd. Hyd. 1,7,10
2400-6600  Fair idle, Street Performance. Best with 5-speed or 2500+ stall.     
220245-10 NA 278 282 225 229 .533 .512 110 106 Hyd. Hyd. 1,7,10
2200-6200  Fair idle, Street/Strip. Auto OK with 2500+ stall.      
220245-12 NA 278 282 225 229 .533 .512 112 108 Hyd. Hyd. 1,7,10
2200-6200  Fair idle, Street & mild Performance usage. Crisp throttle.     
222755-12 CL222755-12 278 284 225 231 .533 .544 112 108 Hyd. Hyd. 1,7,10
2200-6500  Fair idle, Street & Mild Performance usage. Crisp throttle.     
220325-08 NA 278 286 225 233 .560 .565 108 104 Hyd. Hyd. 1,7,10
2200-6500  Choppy idle, Street performance usage. 2500+ stall.      
220325-10 CL220325-10 278 286 225 233 .560 .565 110 106 Hyd. Hyd. 1,7,10
2200-6600  Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.    
220525-10 NA 280 286 227 233 .597 .597 110 106 Hyd. Hyd. 1,7,10
2400-6800  Rough idle, Hot Street/Strip, excellent mid range performance. 2500+ stall, gears, intake.   
220525-12 NA 280 286 227 233 .597 .597 112 108 Hyd. Hyd. 1,7,10
2400-6800  Good idle, good all around performance. Good vacuum. 9.5:1+ CR, 2500+ stall & gears.   
220305-08 NA 284 284 231 231 .544 .544 108 104 Hyd. Hyd. 1,7,10
2600-6500  Choppy idle, strong low & mid range performance. 2500+ stall.     
220255-10 CL220255-10 284 288 231 235 .544 .565 110 106 Hyd. Hyd. 1,7,10
2700-6600  Rough idle, Street/Strip performance. Great low to mid-range torque & power.    
220255-12 NA 284 288 231 235 .544 .565 112 108 Hyd. Hyd. 1,7,10
2700-6800  Fair idle, performance usage. Great mid-range torque & horsepower.     
222735-12 CL222735-12 288 294 235 241 .581 .581 112 108 Hyd. Hyd. 1,7,10
2800-6800  Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.     
221815-10 NA 290 298 237 245 .597 .597 110 106 Hyd. Hyd. 1,7,10
2900-6800  Lopey idle, Hot Street/Bracket, good mid range. 9.5-10.5:1 CR, 2800+ stall.    
220275-10 NA 294 300 241 247 .581 .603 110 106 Hyd. Hyd. 1,7,10
3200-7000  Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.     
223365-10 NA 300 300 247 247 .603 .603 110 106 Hyd. Hyd. 1,7,10
3400-7000  Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.    
220335-10 NA 300 304 247 251 .576 .576 110 106 Hyd. Hyd. 1,7,10
3500-7200  Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.     
220355-10 NA 304 310 251 257 .592 .592 110 106 Hyd. Hyd. 1,7,10
3800-7400  Upper mid-range & top end power. Needs 11.0:1+ CR.      
229995 NA Custom Grind Camshaft
Retro-Fit Hydraulic Roller Special Order Camshaft.       
Hyd. Hyd. 1,7,10

10-Ford-Small-Block-1963-1995-(except-302-H.O.)-MFTC-HRC 220001
cam recommendation_btnAll Howards™ Cams use the highest-grade race quality cores available. All hydraulic and mechanical flat tappet camshafts are 100% Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. Howards™ Cams are manufactured on dedicated high precision cam grinding machines. Most Howards™ Cams are packaged and shipped in our unique, hard, high impact plastic reusable cases. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.







Cam Part No. Cam & Lifter Set Part No. Duration
IN
Advertised
EX
Duration
IN
@.050"
EX
Valve w/1.60
IN
Lift Rockers
EX
Lobe Separation Angle Intake Centerline Valve
IN
Lash
EX
Notes
212342-10 NA 265 265 230 230 .512 .512 110 106 .022 .022 1
2000-5800  Good Street cam, broad power range. 2200+ stall recommended.     
210542-08 NA 258 264 230 236 .561 .574 108 104 .018 .018 1,16
1800-5600  Hot Street/Mild Strip. Good mid range torque & power. 2000+ stall.     
211332-08 NA 264 268 236 240 .574 .590 108 104 .018 .018 1,16
2200-6000  Street/Strip, high torque with mid range & top end power. 2500+ stall.    
210102-06 NA 275 281 240 246 .539 .555 106 102 .022 .022 1
2400-6400  Hot Street/Brackets. Lopey idle. Needs higher CR & gears.     
210102-08 NA 275 281 240 246 .539 .555 108 104 .022 .022 1
2400-6400  Hot Street/Bracket. Needs 10.0+ CR, 3200+ stall & gears.     
210102-12 NA 275 281 240 246 .539 .555 112 108 .022 .022 1
2400-6500  Fair idle, Moderate Street/Bracket, good low & mid range torque. 10.5-11.5:1, 3000+ stall.   
211002-08 NA 279 279 244 244 .544 .544 108 104 .022 .022 1
2600-6500  Rough idle, super mid-range performance. Needs 11.0:1 CR-up.     
212352-06 NA 281 287 246 252 .549 .565 106 102 .022 .022 1
2800-6800  Fair idle, Street/Strip in light car. 10.0:1 CR, 4.10 or lower gears.     
211052-08 NA 283 283 248 248 .544 .544 108 104 .022 .022 1
2800-7000  Street/Strip, powerful through entire rpm range.      
212372-08 NA 285 291 250 256 .560 .571 108 104 .022 .022 1
3000-7200  Rough idle, needs good induction system. Good Oval Track cam.     
212362-08 NA 289 295 254 260 .587 .592 108 104 .022 .022 1
3400-7400  Rough idle, Bracket cam. Best with 11.0:1+ CR & 4000+ stall.     
212532-06 NA 295 299 260 264 .592 .592 106 102 .022 .022 1
3600-7600  Bracket Race or 3/8 to 1/2 mile Oval Track with fast corners. 331-363.    
212322-08 NA 296 303 260 268 .592 .587 108 104 .022 .022 1
3600-7800  Rough idle, Bracket favorite. Needs 11.0:1 CR & 4000+ stall.     
219992 NA Custom Grind Camshaft
Mechanical Flat Tappet Special Order Camshaft.         
1


OE Muscle Mechanical Flat Tappet Camshafts          
217322-14 NA 310 310 227 227 .477 .477 114 108 .018 .018 1
1800-5800  Near duplicate of the Ford 271HP/289 (FMC #C3OZ-6250-C) & 290HP/302 (C9ZZ-6250-A).   
217272-07 NA 318 320 251 252 .528 .528 107 102 .020 .020 1
3000-7000  Near duplicate of the Ford LeMans cam (FMC #C7FE-6250-A).     

11-Ford-Small-Block---1963-1995-(except-302-H.O.)-Steel-Billet-MRC-HRC 221313-10
cam recommendation_btnAll Howards mechanical roller cams are made from premium billet steel. Mechanical roller cams are designed and mainly used in full competition applications. Real race conditions are extremely punishing to the valvetrain and the camshaft. So why would you use a cast core? No matter how good the heat-treatment, a cast core (SADI) will not provide the performance or durability of an American steel billet cam. At Howards Cams we will not skimp on materials for higher profits.







Cam Part No. Cam & Lifter Set Part No. Duration
IN
Advertised
EX
Duration
IN
@.050"
EX
Valve w/1.60
IN
Lift Rockers
EX
Lobe Separation Angle Intake Centerline Valve
IN
Lash
EX
Notes
221213-08 NA 261 269 229 237 .592 .592 108 104 .022 .022 1,5,10
2000-6000  Noticeable idle, Street Rod Cruiser. Should have 9.0:1 CR, 2000+ stall.    
221213-10 NA 261 269 229 237 .592 .592 110 106 .022 .022 1,5,10
2000-6000  Noticeable idle, good for Weekend Street Cruiser. Should have 9.0:1 CR, 2000+ stall.   
221203-08 NA 269 269 237 237 .592 .592 108 104 .022 .022 1,5,10
2200-6400  Rough idle, Street/mild Strip. Good lower mid range. 9.5:1 CR, 2500+ stall.    
221203-10 NA 269 269 237 237 .592 .592 110 106 .022 .022 1,5,10
2200-6400  Rough idle, Street Performance/mild Strip. Recommend 9.5:1 CR, 2500+ stall.    
220183-08 NA 269 275 237 243 .592 .592 108 104 .022 .022 1,5,10
2200-6200  Mild rough idle, Weekend Cruiser/mild Strip. 2500+ stall recommended.    
220183-10 NA 269 275 237 243 .592 .592 110 106 .022 .022 1,5,10
2200-6200  Mild rough idle, Weekend Cruiser/Power Tour favorite. 2500+ stall recommended.    
220173-06 NA 275 281 243 249 .592 .600 106 102 .022 .022 1,5,10
2400-6500  Lopey idle, Strong low to mid range torque. 10.0:1+ CR, 2500+ stall.     
220173-08 NA 275 281 243 249 .592 .600 108 104 .022 .022 1,5,10
2400-6400  Rough idle, Strong low to mid range power band. 10.0:1+ CR, 2500+ stall.    
221313-10 NA 277 277 245 245 .624 .624 110 106 .016 .018 1,5,10
2600-6200  Nice idle. Strong low & mid-range.       
221113-08 NA 277 285 245 253 .624 .624 108 104 .024 .024 1,5,10
2600-6500  Lopey idle. Strong mid-range. 10.0:1+ CR.      
221013-06 NA 285 291 253 259 .624 .624 106 102 .025 .025 1,5,10
2800-6600  Heavy Bracket or 1/4-3/8 mile Oval Track, Good mid range torque. 11.0-12.5:1 CR.    
221013-08 NA 285 291 253 259 .624 .624 108 104 .025 .025 1,5,10
2800-6600  Lopey idle. Strong mid-range with top end increase.      
220593-06 NA 285 291 253 259 .683 .683 106 102 .022 .022 1,5,10
2800-6600  Good mid-range horsepower, rough idle. Needs 11.0:1 CR-up.     
221133-06 NA 287 299 255 267 .640 .640 106 102 .025 .025 1,5,10
2900-6800  Strong mid & upper rpm, banked Oval Track & Brackets w/auto trans.    
221133-08 NA 287 299 255 267 .640 .640 108 104 .025 .025 1,5,10
2900-6800  Mid to upper range horsepower & torque. 11.0:1+ Good heads.     
222313-06 NA 291 295 259 263 .624 .656 106 102 .022 .022 1,5,10
3400-7200  Oval Track 1/4-3/8 mile. Good mid to upper torque & power. 2bbl. or 4bbl. carb.    
222313-08 NA 291 295 259 263 .624 .656 108 104 .022 .022 1,5,10
3400-7200  Rough idle, Bracket E.T., good mid range. 11.5:1+ CR, 3500+ stall.     
222123-06 NA 291 299 259 267 .683 .672 106 102 .022 .022 1,5,10
3400-7400  Oval Track 3/8-1/2 mile. Good mid to upper torque & power. Best with 4bbl. carb.    
222123-08 NA 291 299 259 267 .683 .672 108 104 .022 .022 1,5,10
3400-7400  Bracket/Pro/Super Pro, good mid to upper range power. 12.0:1+, 3800+ stall.    
221173-06 NA 295 299 263 267 .683 .672 106 102 .025 .025 1,5,10
3800-7600  Strong mid & upper range horsepower. 11.0:1+ Good heads.     
221613-06 NA 299 303 267 271 .672 .667 106 102 .022 .022 1,5,10
4200-7800  Competition use, good mid & upper HP, needs good heads & compression.    
221613-08 NA 299 303 267 271 .672 .667 108 104 .022 .022 1,5,10
4200-7800  Long Oval Track or Bracket E.T. Drag, good upper rpm horsepower. 12.5:1 CR.    
221223-08 NA 301 305 269 273 .720 .688 108 104 .025 .025 1,5,10
4200-8000  Competition use, good mid & upper power.      
221223-10 NA 301 305 269 273 .720 .688 110 106 .025 .025 1,5,10
4200-8000  Bracket/Competition, good upper end torque & power. 12.0:1+ CR, race converter.    
221123-08 NA 299 307 267 275 .672 .661 108 104 .025 .025 1,5,10
4200-8000  Strong upper horsepower. 11.5:1+ Good heads & induction, 4500+ stall.    
221813-06 NA 301 309 269 277 .693 .661 106 102 .022 .022 1,5,10
4400-8400  Rough idle, Competition, Great upper rpm torque. 12.0:1+ CR, 4500+ stall.    
221813-08 NA 301 309 269 277 .693 .661 108 104 .022 .022 1,5,10
4400-8600  Competition, good upper rpm torque & horsepower. 12.0:1+ CR & race converter.    
221863-06 NA 301 309 269 277 .720 .693 106 102 .022 .022 1,5,10
4400-8400  Competition, good upper mid to top end torque. 12.0:1+ CR & race converter.    
221863-08 NA 301 309 269 277 .720 .693 108 104 .022 .022 1,5,10
4400-8600  Super Pro/Bracket, good upper rpm torque & horsepower. 12.0:1+ CR & race converter.   
221863-10 NA 301 309 269 277 .720 .693 110 106 .022 .022 1,5,10
4500-8800  Good mid range power with top end pull. 12.0:1+ CR & race converter.    
221083-08 NA 307 315 275 283 .688 .672 108 104 .025 .025 1,5,10
4800-8600  Strong upper horsepower. 11.5:1+ Good heads.      
221083-10 NA 307 315 275 283 .688 .672 110 106 .025 .025 1,5,10
4800-8600  Competition profile, good top end power. Needs good parts.     
221093-12 NA 313 331 281 299 .779 .763 112 108 .026 .026 1,5,10
5000-8400  Large cubic inch, all out Competition. Best of everything. Works good w/NOS.    
229993 NA Custom Grind Camshaft
Mechanical Roller Special Order Camshaft.         
1,5,10


Big Bottle Cams™ - Nitrous Oxide Mechanical Roller Camshafts         
221133-12 NA 287 299 255 267 .640 .640 112 108 .022 .022 1,5,10
3000-6800  Fair idle, Performance/Strip with plate system. Great mid range. 11.5:1+ CR, 3500+ stall.   
220373-12 NA 295 305 263 273 .672 .688 112 108 .022 .022 1,5,10
3800-7200  Rough idle, Street/Bracket with manifold system. Good upper rpm. 11.5:1+ CR, 4000+.   
220673-12 NA 299 309 267 277 .688 .693 112 108 .022 .022 1,5,10
4200-8000  Competition with large plate system. Good mid to upper range. 12.0:1+ CR.    
229993 NA Custom Grind Camshaft
Mechanical Roller Special Order Camshaft.         
1,5,10
Home :: Ford V8 :: Ford V8 221-302, 5.0L (except HO) 1962-1995


hrc logo


hrc logo_2

custom cam_logo
Copyright © 2013.
All Rights Reserved.




Upcoming Events
 
Join us!

SEMA 2013
Las Vegas Convention Center
Las Vegas, Nevada
November 5 - 8, 2013

PRI
Indiana Convention Center
Indianapolis IN
December 12 - 14,  2013





Featured Products
    • Max Certified Hydraulic Flat Tappet Cam & Lifter Sets w/ 5yr Warranty
    • HRC Extreme Billet Main Caps
    • Professional 2-Sided 14" Degree Wheels
    • Ultra Lite Billet Composite Fuel Pump Pushrods
    • Max Z.P.M™ Camshaft Break-In Lube & Oil Change Additive
    • "The Original" Direct Lube™ Extreme Duty Lifters 
    • Precision Dense Forged Connecting Rods
    • Tool Steel Mechanical Lifters
    • ProMax™ Stud Girdle Kits
    • Track Smart™ Nitro-Carbided Rocker Arms
    • Howards™ Billet Aluminum Rockers



Contact Us 
280 W. 35th Ave.
Oshkosh, WI 54902
T: (920)2335228
F: (920)2321572
Email: info@howardscams.com
Hours: M-F 8:00 - 5:00 CST

Social Media