| Pushrod Length Checkers Easy and economical tool to layout and determine proper pushrod length for proper valvetrain geometry.Proper valvetrain geometry is necessary to obtain the desired results from the cam and to ensure damage is not done to the rest of the valvetrain. Made from a 5/16” pushrod that is cut and threaded with over one inch of travel. 5/16” ball tip on both ends.
|
 |
| Professional 2-Sided 14” Degree Wheels Not stamped, but CNC machined billet aluminum for accuracy. These oversized degree wheels are precisely etched on both sides with 1º increments. Features easy to read intake valve opens, intake valve closes, exhaust valve opens and exhaust valve closes on one side and intake lobe centerline and exhaust lobe centerline on the other. Standard 1” center hole for use with most degree wheel sockets. Instructions and laminated reusable specification sheet are included.
|
 |
| Retainer Height Tools Measures exact differences in retainers and locks for your combinations. Detect differences in same part numbers or different combinations, for your exact valve spring installed height. Simple to use with most calipers (not included).
|
 |
| Spring Height Micrometer The easiest way to measure valve spring installed height is with a height micrometer. This tool is used between the cylinder head spring seat and valve spring retainer. The tool is adjusted until all components are fully seated. The tool is read just like a micrometer and will provide accurate measurements every time it is used.
|
 |
| Valve Spring Seat Cutters These America made tools from Howards™ will allow the engine builder to modify the cylinder heads to fit the desired valve springs to suit their application. Designed to enlarge the spring pocket for oversized valve springs. Valve guide arbor not included.
|
 |
| Valve Guide Arbors for Valve Spring Seat Cutters These American made tools from Howards™ will allow the engine builder to modify the cylinder heads to fit the desired valve springs to suit their application. Designed to enlarge the spring pocket for oversized valve springs.
|
 |
| Valve Guide Cutters Designed to cut the valve guide to be used with Teflon, Viton or metal body type seals. Useable with hand tools. These American made tools allow you to do this machine work yourself. Includes cutter and valve guide arbor.
|
 |
| Piston Ring Filer To get the most performance and horsepower, you need to set proper ring end gap. Files piston rings quickly and accurately. Simple hand crank design. A must for every engine builder.
|
 |
| E-Z Rocker Wrench No more wishing that you had three hands to adjust your valves. Howards™ E-Z Wrench makes it a breeze to adjust roller rocker arms and steel rocker arms with poly locks.
|
 |
